Woodlands
Hokus Pokus Decor Weaves
Hokus Pokus new "Décor-Weave" designs will inspire you to upcycle your old, previously loved furniture from drab to fab!
Product information
- Sheet size: 88.6cm x 59cm (34.9″ x 23.2″)
- Number of pieces: 1
- Package size: 31.5cm x 25cm
Instructions for application
Requirements for applying a Hokus Pokus Décor-Weave:
- A piece of furniture or project which has been completed to a smooth finish, painted or sanded natural wood
- A Décor-weave Design
- Paint brush
- Brayer
- Water-based sealer
- 400 grit sand paper
- Clean water
- Clean cloth
- Iron
- Optional extra is a glass of wine
With the iron on a COOL, DRY (NOT STEAM) setting, gently iron the back of your Décor-Weave design to remove initial fold lines.
The prepared furniture piece: wipe down with a wet cloth to remove all the dust.
It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.
Sharp pieces of wood splinters or chipped paint, no matter how small, can spoil the surface and texture of your Décor-Weave project.
All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.
Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.
Applying the Décor-weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer.
Wait about 30 min then apply a 1st coat of sealer over the Hokus Pokus
Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.
The last very important step is to sit back and enjoy your masterpiece then share your project on our Hokus Pokus Instagram, Facebook or Pinterest pages.